Huntress
The hull form for this design is a fine entry deep vee for excellent sea keeping performance. Standard power is twin MTU 1200hp engines. HP options would start @ twin 900hp through to twin 2000hp. The propellers are in tunnels to reduce shaft angle and overall draft which increases efficiency.

With trans ocean passages planned the fuel has been separated into primary and long-range tanks, which are all integral.

Some features incorporated are internal stair way to the fly-bridge, al-fresco dining area and electric window from the galley, built in coffee machine to name but a few.

The interior on Huntress was designed by Sarah Nathan. www.yachtcouture.com

Specifications:
LOA: 20.8m
Beam: 5.8m
Draft: 1.3m
Displacement: 3400kg
Fuel: 8100L
Water: 1000L
Engine: MTU 93m 2000 Series

For More Click Here




Coastal Cowgirl

Designed primarily as a family orientated cruiser but also to cater for discerning charter groups as the vessel is under full MSA survey.

This design features a large cockpit for entertaining or fishing and two living areas plus private accommodation frd and aft.

The hull form is one that performs well with modest house-power and has excellent sea keeping qualities.


Specifications
Length: 15.8 meters
Beam: 4.9 meters
Draft: 1.1 meters
Displacement: 18300 kg
Builder: Lloyd Stevenson Boatbuilders
Year: June 2005
Engine: 2x Cummins 480 CTA
Cruise speed: 21 Knots


For More Click Here




Balshazar

A Mid pilothouse design with sumptuous interior styling, designed to perform with modest horse power.

The hull form is fine entry with generous waterline beam to make her perform well in open waters as her owners often cross Cook Strait.

A comfortable 3 or 4 steps separate any one area from another which helps to give a flowing feel to the layout.


Specifications
Length: 16m/ 53ft
Beam: 5.1m / 16.7ft
Draft: 1.2m / 4. Ft
Displacement: 18,500kg
Year: December 2000
Engine: 2 x Cummins 6CTA 450hp
Cruise speed: 21knots

For More Click Here




Te Whara III

Best described as a compact mid pilothouse this design has relatively deep deadrise for excellent rough water capabilities, with two 350 hp engines Te Whara has proved to be an agile totally predictable sea boat.


Specifications
Length: 14m/ 46 ft
Beam: 4.35m / 14.3 ft
Draft: 1 m / 3.3 Ft
Displacement: 13000kg
Builder: Lloyd Stevenson Boatbuilders
Year: 1998
Engine: 2 x Yanmar STE 350hp
Cruise speed: 23 knots

For More Click Here